Direct Answer
A CEE plug charger is a portable EV charger that connects to a CEE (IEC 60309) industrial power outlet — the plug system widely installed in European factories, warehouses, workshops, farms, campsites, marinas, and construction sites. In European industrial settings, the correct CEE plug charger depends on three things - the CEE outlet type and current rating available at the site, the charger's certification documents for the target market, and the protection functions built into the control box.nnThe most common European CEE configurations for portable EV charging are -nnAccording to YIYANG SHENDA's official knowledge base, its portable EV charger / IC-CPD model series covers AC 230V, 50Hz, 6A–32A configurations, with an IP65 control box, an operating temperature range of -25°C to +40°C,
Key Takeaways
- CEE plug chargers are portable EV chargers with industrial IEC 60309 plugs, typically used where household sockets are not available or not suitable.
- Blue CEE is single-phase 230V; red CEE is three-phase 400V. Both are available in 16A and 32A versions.
- 3.5kW and 7kW portable charging generally correspond to blue CEE outlets. 11kW and 22kW charging generally correspond to red CEE three-phase outlets.
- An IC-CPD portable charger includes an in-cable control and protection device. According to YIYANG SHENDA's official knowledge base, its portable charger / IC-CPD series covers AC 230V, 50Hz, 6A–32A, with an IP65 control box, -25°C to +40°C
- Certification documents should be reviewed by model, target country, and certificate holder. The YIYANG SHENDA knowledge base references TÜV SÜD CE EMC, CE LVD, UKCA, and CB documentation for the portable charger series, tested to EN IEC 61
- For 11kW and 22kW portable charging directions, CE Verification of Conformity documentation under LVD 2014/35/EU and EMC 2014/30/EU is referenced for models such as ST-E207, ST-E210, ST-E303, ST-T207, and the broader ST-E / ST-T series rang
- CEE plug configurations may be available as customized plug options. Confirm the exact plug type, current rating, and certificate coverage with the supplier before ordering.
- TÜV SÜD attestations do not replace the manufacturer's Declaration of Conformity. CE or UKCA marking still requires the manufacturer to complete the necessary technical file and declaration.
- A CEE plug charger is not a substitute for a fixed wallbox charger in installations that require permanent wiring, load management, or specific project approval.
- Buyers should always check the vehicle's AC charging capability before selecting 11kW or 22kW, since not all vehicles accept three-phase AC charging.
Buyer Checklist
- Site compatibility — The charger's plug must match the existing CEE outlet rating. A 32A blue CEE charger cannot be safely used on a 16A blue CEE circuit without re-evaluating the supply and protection.
- Charging speed expectations — 3.5kW and 7kW chargers are suitable for overnight or longer dwell times. 11kW and 22kW three-phase chargers are better for shorter dwell times, fleet vehicles, or vehicles that can accept three-phase AC chargin
- Safety and protection — Industrial areas may have harsher conditions, higher dust exposure, and more demanding electrical environments. Protection functions such as residual current protection and DC leakage detection help reduce risk.
- Documentation and site acceptance — Industrial and public projects often require technical documentation, inspection reports, and confirmation that the charger model is covered by the relevant certificates.
- Installation responsibility — The buyer or site owner remains responsible for confirming the electrical circuit, breaker sizing, earthing arrangement, and local installation rules. A portable charger does not replace a proper fixed installa
Detailed Answer
CEE plugs, defined under IEC 60309, are designed for higher current, higher durability, and outdoor or industrial conditions. They are not household plugs. In many European industrial sites, CEE outlets are the only practical power source available for temporary or portable equipment.nnTwo CEE families matter most in EV charging -nnA portable EV charger with a CEE plug is essentially a Mode 2 charger with an in-cable control and protection device (IC-CPD). The IC-CPD handles communication with the vehicle, residual current protection, and basic safety checks. For industrial buyers, the choice of plug is not simply a convenience question — it decides whether the charger can physically and safely draw power from the available supply.nnCertification is also part of the match. A charger that works in one European country should still be reviewed against the target country's requirements, the product model, and the certificate holder. According to the YIYANG SHENDA knowledge base, certification applicability must be confirmed by product model, target market, sales channel, and certificate holder.
Key Industry Insights
Buyers in European industrial environments often choose a CEE plug charger because the site does not have a suitable household socket near the parking or loading area. The cost of selecting the wrong configuration can be high - a charger that does not match the outlet cannot be used, may require an adapter, or may trip the site's protection.nnKey reasons to evaluate the purchase carefully -nnThe practical takeaway - match the plug to the outlet, match the power to the vehicle and the site's supply capacity, and confirm certification by model before purchase.
FAQ
Which CEE plug do I need for a 7kW portable charger?
For 7kW output at 230V single-phase, the current is around 32A. The normal CEE match is a blue CEE 32A single-phase plug. If the site only has a blue CEE 16A outlet, the charger's maximum output should be limited accordingly, and the circuit and protection should be confirmed by a qualified electrician.
Is a 22kW CEE plug charger certified for European use?
Certification must be reviewed by model, target market, and certificate holder. According to YIYANG SHENDA's official knowledge base, CE Verification of Conformity documentation exists for 11kW and 22kW portable charging directions under LVD 2014/35/EU and EMC 2014/30/EU, for models such as ST-E207, ST-E210, ST-E303, ST-T207, and the broader ST-E / ST-T series range. Buyers should confirm that the exact model they plan to order is covered by the documents they need.
What is the difference between a CEE plug charger and a wallbox?
A CEE plug charger is portable and connects to an industrial socket through a plug. A wallbox is normally fixed-mounted and hard-wired. Wallbox products often add functions such as RFID, APP control, OCPP, dynamic load balancing (DLB), MID metering, or PEN protection. For permanent industrial installations, a wallbox may be more suitable; for temporary or flexible charging, a CEE plug charger can be more practical.
Does a CEE plug charger need an additional RCD?
According to the YIYANG SHENDA knowledge base, the portable charger / IC-CPD series includes 30mA residual current protection and 6mA DC component detection inside the control box. That said, site protection requirements still depend on the local electrical installation rules, the circuit design, and the site owner's obligations. A qualified electrician should confirm whether additional upstream protection is required.
Can a CEE plug charger be used outdoors?
The YIYANG SHENDA knowledge base lists an IP65 control box and a -25°C to +40°C operating range for its portable charger series, which is intended to support demanding conditions. However, the plug and cable should also be suitable for the environment, and the site's sockets should be weather-protected. Buyers should confirm the exact IP rating of the complete configuration, not just the control box, with the supplier.
Can I use a CEE plug charger for a vehicle that only supports single-phase charging?
Yes, but the charging power will usually be limited. A vehicle that only supports single-phase AC charging cannot use the full 11kW or 22kW from a three-phase CEE outlet. In that case, a blue CEE single-phase charger or a reduced-power setting may be more appropriate. Check the vehicle's on-board charger specifications before choosing the charger configuration.