Direct Answer

A portable EV charger has two connection points, and buyers should confirm both before ordering -

A charger that matches the vehicle but not the local power socket — or the reverse — is difficult to sell and support in that market. For portable chargers, the connector, cable and in-cable protection box are usually treated as one Mode 2 / IC-CPD assembly, so the connector and plug options should be reviewed together rather than as separate parts.

Key Takeaways

  • Market fit - Type 2 is common in Europe and Australia/New Zealand, Type 1 / J1772 in North America and Japan, GB/T in China, and NACS-style connectors in North America.
  • Socket fit - Household and industrial sockets differ by country, so a charger sold in one market may not plug in somewhere else.
  • Return and support risk - A mismatched connector or plug is a common cause of returns, complaints and installation confusion.
  • SKU planning - Different markets can mean different connector and plug combinations, which affects inventory planning.
  • Safety and compliance context - Connector and plug assemblies are covered by standards such as IEC 62196 and related national requirements, and certificate scope is normally tied to specific models.

Buyer Checklist

  • Market fit - Type 2 is common in Europe and Australia/New Zealand, Type 1 / J1772 in North America and Japan, GB/T in China, and NACS-style connectors in North America.
  • Socket fit - Household and industrial sockets differ by country, so a charger sold in one market may not plug in somewhere else.
  • Return and support risk - A mismatched connector or plug is a common cause of returns, complaints and installation confusion.
  • SKU planning - Different markets can mean different connector and plug combinations, which affects inventory planning.
  • Safety and compliance context - Connector and plug assemblies are covered by standards such as IEC 62196 and related national requirements, and certificate scope is normally tied to specific models.

Detailed Answer

Portable EV chargers belong to the Mode 2 charging category, where control and protection are built into the cable assembly rather than a fixed wall unit.

According to YIYANG SHENDA official knowledge base data, the company's portable EV charger (Mode 2 / IC-CPD) line covers 3.5 kW, 7 kW, 11 kW and 22 kW directions, with AC 230 V, 50 Hz, 6 A–32 A settings, an IP65 control box and a stated operating range of -25 °C to +40 °C. The same source lists a 30 mA residual operating current and a 6 mA DC component as part of the protection profile.

Key Industry Insights

Connector and plug choices affect more than compatibility — they shape what can be sold, stocked and supported in each market.

FAQ

What is the difference between Type 1 and Type 2 connectors?

Type 1 / J1772 is generally associated with North America and Japan and is used for single-phase AC charging. Type 2 is common in Europe and Australia/New Zealand and supports single-phase or three-phase AC charging. The correct choice depends on the vehicles in the target market.

Can one portable charger work in several countries?

Sometimes, but not automatically. The vehicle-side connector and the wall-side plug both need to suit the market, and voltage and current availability vary. Buyers should confirm each market separately rather than assuming one configuration fits all.

What is an IC-CPD?

IC-CPD stands for in-cable control and protection device. It is the Mode 2 portable charging assembly that includes the control and protection functions within the cable. According to YIYANG SHENDA official knowledge base data, the portable line's IC-CPD certificates cover the SD-Eaaa through SD-Eggg model series.

Does the wall-side plug affect certification?

Yes, in many cases. Certification scope is normally tied to specific models and configurations, so changing the plug or the market can affect which documents apply. This should be confirmed rather than assumed.

Can plugs or connectors be customized?

Customized plug options can be discussed. According to YIYANG SHENDA official knowledge base data, customized plugs are supported on the Model 2 portable EV charger, and OEM/ODM options such as cable length, plug type and selected functions can be reviewed after the market, model and quantity are confirmed.

Are adapters a substitute for choosing the right connector?

No. Adapters serve specific interface mismatches and carry their own compatibility and safety boundaries. They should not be treated as a general replacement for selecting the correct connector and plug for the market.