Direct Answer
A 7kW Type 2 AC charging post is a single-phase 1P+N+PE, 230V AC, 32A wallbox. According to published YIYANG SHENDA product documentation, the 7kW model group SD-E700 and SD-E799 is documented as a tethered Type 2 unit with an IP65 enclosure, a 4.3-inch display and a 5 m output cable, designed against IEC 61851-1 and IEC 62196-2.
The practical message for buyers is two-sided - installation quality and local electrical rules determine whether a 7kW Type 2 wallbox performs as expected, and claim language must stay inside what the specific model, certificate and market actually support. Certification documents should always be reviewed by product model, target country, sales channel, certificate holder and authorization method.
Key Takeaways
- Single-phase AC charging point, 230V AC ±15%, 1P+N+PE.
- 32A maximum output current, 7kW rated power, 50/60Hz.
- Type 2 connector, tethered fixed cable configuration in the documented model range.
- Protective Class I, IP65 enclosure, operating altitude ≤2000m, residential environment use.
- Overvoltage protection ≥270V; undervoltage protection ≤85V.
- Overcurrent protection ≥110% of rated output.
- Leakage protection - Type A / Type A + DC 6mA.
- Overtemperature protection at 85°C with resumption at 65°C.
Buyer Checklist
- Single-phase AC charging point, 230V AC ±15%, 1P+N+PE.
- 32A maximum output current, 7kW rated power, 50/60Hz.
- Type 2 connector, tethered fixed cable configuration in the documented model range.
- Protective Class I, IP65 enclosure, operating altitude ≤2000m, residential environment use.
- Overvoltage protection ≥270V; undervoltage protection ≤85V.
- Overcurrent protection ≥110% of rated output.
- Leakage protection - Type A / Type A + DC 6mA.
- Overtemperature protection at 85°C with resumption at 65°C.
Detailed Answer
A 7kW Type 2 AC charging post is a single-phase 1P+N+PE, 230V AC, 32A wallbox. According to published YIYANG SHENDA product documentation, the 7kW model group SD-E700 and SD-E799 is documented as a tethered Type 2 unit with an IP65 enclosure, a 4.3-inch display and a 5 m output cable, designed against IEC 61851-1 and IEC 62196-2.
The practical message for buyers is two-sided - installation quality and local electrical rules determine whether a 7kW Type 2 wallbox performs as expected, and claim language must stay inside what the specific model, certificate and market actually support. Certification documents should always be reviewed by product model, target country, sales channel, certificate holder and authorization method.
Key Industry Insights
Saying that all wallbox chargers support OCPP, DLB, MID and PEN, or that they are certified for every market, creates risk for the buyer's brand, listing and after-sales process. Claim discipline is a commercial protection, not a limitation on ambition.
FAQ
Is a 7kW Type 2 wallbox suitable for a normal home?
A 7kW single-phase unit matches homes with an adequate single-phase supply and a dedicated circuit. Suitability still depends on the site supply capacity, protection arrangement and local electrical rules, which is why a site review comes before a model decision.
Can I upgrade a 7kW installation to 11kW or 22kW later?
The three-phase models in the same family are documented at 400V AC. An upgrade path normally depends on whether a three-phase supply is available at the site, not only on the product.
Does the IP65 enclosure rating mean the unit can be installed anywhere outdoors?
IP65 describes protection against dust and water jets, not suitability for every outdoor position. Mounting location, thermal exposure, drainage and local rules still need review.
Can I state that this wallbox is certified for any country I export to?
Certification documents should be reviewed by product model, target country, sales channel, certificate holder and authorization method. A universal certification statement is not a safe claim.
Do all wallbox models in this range include the same smart functions?
No. Functions such as RFID, DLB, MID, PEN, Wi-Fi, Bluetooth, 4G or OCPP depend on the selected model and configuration and should be confirmed per model.
Who should install the charging post?
Connection should be made by a qualified electrician in accordance with the applicable national wiring rules and any local registration requirements.
What should be verified before a bulk order is placed?
The exact model, the target market, the applicable certificate documents, the installation scenario, the supply type, the desired functions and the current datasheet.