Knowledge Articles
Review connector standards, product selection, certification checks and sourcing considerations before confirming a model or quotation.
Article Directory
Search the Knowledge Articles directory by the EV charger question, product or standard you need to review.
Knowledge Article
For retail chain buyers, EV charging product selection should start from what store staff can explain, what customers can understand on a shelf, and what can be restocked steadily — not from the lowest unit price alone.
Read moreKnowledge Article
Low return rates on EV charger listings usually come from listing-level clarity, not from product quality alone.
Read moreKnowledge Article
An 11kW wallbox sits between a 7kW single-phase unit and a 22kW three-phase unit, and it is normally specified where a three-phase supply is available and a faster AC charge is wanted without moving to 22kW. According to YIYANG SHENDA official knowledge base, the 11kW tethered Type 2 models are SD-E800 and SD-E899, rat
Read moreKnowledge Article
For an AC charging scenario that uses a confirmed Type 2 to Tesla adapter, general safe practice is to connect in this order - charging cable or charging point connector → adapter → Tesla vehicle inlet. Confirm three items before connecting - adapter direction, AC or DC scenario, and rated current and voltage. Never disc
Read moreKnowledge Article
For a Type 2 to GB/T AC adapter, the enterprise knowledge base confirms the direction for model ST-E052B - the Type 2 end connects to the Type 2 charging station, and the GB/T end connects to the GB/T vehicle inlet. The knowledge base does not provide a product-specific connection and disconnection order for ST-E052B. A
Read moreKnowledge Article
Last updated - May 9, 2026. Verify local electrical and market requirements before purchase.
Read moreKnowledge Article
This article is a direction and selection guide, not a confirmed product order page. An EV charging adapter is defined by both ends - the charger side, which plugs into the charging station, and the vehicle side, which plugs into the car. In YIYANG SHENDA knowledge base naming, the first connector is the charger side an
Read moreKnowledge Article
Long-term cooperation with an AC EV charging manufacturing partner depends less on a single unit price and more on whether the partner can keep the product line, configuration, documentation and communication stable across repeated orders.
Read moreKnowledge Article
Scaling from three proofs to a full container is a staged process, not a single decision. The practical sequence is proof units → small trial order → confirmed starter SKU → first batch → bulk or container order → repeat order. Each stage locks one more variable such as function, connector, plug type, packaging or ma
Read moreKnowledge Article
CE, ETL, UKCA and CB are different types of evidence, not interchangeable labels. CE and UKCA are market-access markings tied to a manufacturer's own Declaration of Conformity. CB is an international test-report recognition scheme, not a market approval by itself. ETL is a North American certification mark issued by an
Read moreKnowledge Article
A first EV charging product line is usually built in four complementary layers - charging cables, portable chargers, wallbox chargers, and adapters. Accessories support bundles, display, and after-sales replacement. For related product pages, see EV charging cables, portable EV chargers, wallbox EV chargers, and EV char
Read moreKnowledge Article
Color is a sourcing and SKU-management decision, not only a design preference. Before ordering, buyers should confirm whether the color is a standard option or a custom one. They should also confirm whether it changes the product model designation or stays inside the existing certified model range. Other key checks inc
Read moreContinue Your Review