Knowledge Articles

Practical EV charger answers for B2B product decisions

Review connector standards, product selection, certification checks and sourcing considerations before confirming a model or quotation.

Browse Articles Back to Knowledge Center

Article Directory

Find the EV charger question you need to answer

Search the Knowledge Articles directory by the EV charger question, product or standard you need to review.

Knowledge Article

Using UK Plugs in EV Charging – Applications and Compliance Notes

UK plugs are mainly used in portable EV charging, where a Mode 2 portable charger connects to a standard domestic socket. For the UK, buyers should confirm the plug type, current rating, and model-specific UKCA / Declaration of Conformity status before ordering. A UK plug is not the same as the vehicle-side charging co

Knowledge Article

22kW Three-Phase EV Charging Cable – High-Power Charging Selection and Matching

A 22kW three-phase EV charging cable connects an electric vehicle to a three-phase AC charging station capable of delivering 22kW. In most European and international three-phase markets, this is a Type 2 to Type 2 cable conforming to IEC 62196-2 and rated for 400V AC three-phase at 32A. Selection and matching depend on

Knowledge Article

EV Charger Accessories Buying Guide – From CEE Plugs to Protective Devices

EV charger accessories are the practical parts that complete a charging system - plug heads and CEE-style connectors, sockets, wall brackets, cable organizers, storage bags, terminals, control boards, and protective devices such as residual current, overvoltage, overcurrent, and overtemperature protection. For distribut

Knowledge Article

RFID Charging Stations – Card-Based Management and Billing for Commercial Sites

RFID charging stations are EV chargers that use RFID cards or tags to control charging access and support user management for commercial sites. Instead of open “plug and charge” access, a user taps an authorized card to start the charger. This makes it easier for hotels, offices, residential communities, fleets, parkin

Knowledge Article

EV Charging Cable Connector Types – Type 1, Type 2, and UK Plug Compared

EV charging cables use different connector types depending on the vehicle and the charging equipment. Type 1 and Type 2 are common vehicle-side AC charging connectors, while a UK plug — usually a BS 1363 three-pin plug — is mainly used on portable EV chargers to connect to a standard UK home socket.

Knowledge Article

Type 2 to GB/T Charging Adapter – European Charging Solution for EVs Imported from China

A Type 2 to GB/T charging adapter is an AC interface converter that lets an electric vehicle imported from China with a GB/T inlet charge from a European Type 2 AC charging point. YIYANG SHENDA's ST-E052B model is rated for AC 220V–480V and up to 32A. YIYANG SHENDA official product specifications present this model as a practica

Knowledge Article

7kW Portable EV Charger – Home, Travel, and Emergency Charging Scenarios

A 7kW portable EV charger is a compact AC charging unit that can be carried in a vehicle and used wherever a suitable power source is available. According to the YIYANG SHENDA official knowledge base, portable EV chargers are designed for home garage charging, travel emergency replenishment, vehicle companion use, and simil

Knowledge Article

Tesla to GB/T Adapter – Using North American Tesla Vehicles on Chinese Charging Stations

A Tesla-to-GB/T adapter is a connector conversion device that lets a North American Tesla vehicle with a NACS inlet plug into a Chinese charging station built around the GB/T standard. It is not a universal product. The correct adapter depends on the vehicle-side connector, the charger-side connector, the charging mode

Knowledge Article

UK Market Type 2 Charging Cable – Selection, Connector, and Compliance Essentials

A Type 2 to Type 2 EV charging cable is the most common cable format for UK AC charging in practice. For most UK buyers, selection comes down to connector type (Type 2 / Mennekes), rated current (16A or 32A), voltage compatibility (250V AC single-phase or 480V AC three-phase), cable length, IP protection, mechanical du

Knowledge Article

Type 1 J1772 Charging Cable – What North American EV Users Should Know

A Type 1 J1772 charging cable is a standard AC charging cable used to connect many electric vehicles in North America to Level 1 and Level 2 charging equipment. It uses the SAE J1772 connector, also known as Type 1, which has been a common AC charging inlet on North American EVs for years. Even as the market transition

Knowledge Article

RFID EV Chargers – Best Practices for Parking Lot and Employee Charging Management

RFID-enabled EV chargers let parking lot operators and employers authorize charging with a card or fob, prevent unauthorized use, and keep a clear record of every charging session. YIYANG SHENDA wallbox models differ in available functions, so RFID support must be verified on the exact model and configuration before purchas

Knowledge Article

Smart Wallbox Charger Features – Choosing the Right Model for Home Use

For home use, the most suitable YIYANG SHENDA wallbox models are the 7kW (single-phase) or 11kW (three-phase) Type 2 AC charging stations, depending on your home's electrical capacity and vehicle compatibility. Smart features such as RFID, APP control, OCPP, and DLB should be selected based on your specific usage scenario,

Continue Your Review

Connect an article with the right product, document and model-specific answer.

Browse Topic Hubs Ask YIYANG SHENDA