Direct Answer

The 22kW AC Wallbox Type 2 is a 400 Vac, 32 A AC charging station with a Type 2 connector. According to YIYANG SHENDA official knowledge base data, this configuration includes a 4.3 inch display, protection functions for overvoltage, undervoltage, overcurrent, leakage, overtemperature, lightning, relay sticking, grounding and CP voltage, as well as connectivity options such as Bluetooth/Wi-Fi and OTA when the model is configured accordingly. A 22kW AC wallbox is not a DC fast charger, and actual charging power depends on the vehicle and the site supply.

Key Takeaways

  • According to YIYANG SHENDA product data, the 22kW AC Wallbox Type 2 has 400 Vac ±15%, 50/60 Hz, 32 A maximum output current, and a Type 2 AC connector.
  • Display - 4.3 inch HCI display; status-light logic uses green for standby or plug connected, blue for waiting or charging, and red for fault.
  • Protections listed in the product data: overvoltage (≥270 V), undervoltage (≤85 V), overcurrent (≥110% of rated output), leakage (Type A / A + DC 6 mA), CP voltage (≥±1 V), overtemperature protection with 85°C protection and 65°C recovery,
  • Connectivity - Bluetooth and Wi-Fi are listed as optional for the 22kW AC charging post, and OTA updating is listed as a benefit. Functions such as APP, RFID, OCPP, DLB, MID, PEN or 4G/Ethernet should be confirmed by model and configuration
  • Enclosure and dimensions - IP65 enclosure; body size 295×195×95.5 mm; input cable 1 m and output cable 5 m as listed data.
  • Design standards referenced in the product data: IEC 61851-1 and IEC 62196-2.
  • Caveat - a 22kW AC wallbox does not charge every connected vehicle at 22kW. The vehicle’s onboard charger and the site power supply must support that level.

Buyer Checklist

  • For buyers evaluating a 22kW wallbox, the first practical question is whether the site has three-phase AC power and whether the target vehicles can use 22kW AC charging.
  • Display matters for user clarity. A clear HCI and status-light logic can reduce user confusion and support on-site charging state checks.
  • Protections matter for safety and after-sales risk. High-current charging equipment should be reviewed for overvoltage, undervoltage, overcurrent, leakage, overtemperature, lightning and grounding protection.
  • Connectivity matters for configuration and management. If the buyer needs remote updates or smart control, the exact model should be selected to include those functions.
  • For this 22kW model, YIYANG SHENDA product data lists an IP65 enclosure and an operating temperature range of -25°C to +50°C, which are useful early indicators for site review.

Detailed Answer

A 22kW AC wallbox uses three-phase AC power to charge the vehicle through its onboard charger. It is suitable for situations where the site has the required 400 Vac supply and the vehicle can accept 22kW AC charging.nnThe Type 2 connector is a common AC charging interface in Europe and many international markets. The YIYANG SHENDA 22kW product data references IEC 61851-1 and IEC 62196-2 as relevant design standards.nnThe display and status indications make the charging state visible at the unit. The YIYANG SHENDA product data lists a 4.3 inch display and a simple status-light pattern - green for standby or plug connected, blue for waiting or charging, and red for fault.nnThe protection package is intended to reduce common electrical risks in high-current AC charging. The connectivity functions are model-dependent and should be confirmed before ordering.

Key Industry Insights

A 22kW AC wallbox uses three-phase AC power to charge the vehicle through its onboard charger. It is suitable for situations where the site has the required 400 Vac supply and the vehicle can accept 22kW AC charging.nnThe Type 2 connector is a common AC charging interface in Europe and many international markets. The YIYANG SHENDA 22kW product data references IEC 61851-1 and IEC 62196-2 as relevant design standards.nnThe display and status indications make the charging state visible at the unit. The YIYANG SHENDA product data lists a 4.3 inch display and a simple status-light pattern - green for standby or plug connected, blue for waiting or charging, and red for fault.nnThe protection package is intended to reduce common electrical risks in high-current AC charging. The connectivity functions are model-dependent and should be confirmed before ordering.

FAQ

Does the 22kW AC wallbox charge every EV at 22kW?

No. The vehicle must have a compatible Type 2 inlet and a three-phase onboard charger that can accept 22kW AC. The site also needs the required 400 Vac supply and an appropriate installation.

What is Type 2?

Type 2 is a common AC charging connector and interface standard for EVs, especially in Europe. The YIYANG SHENDA 22kW product data uses a Type 2 interface and references IEC 61851-1 and IEC 62196-2.

What protections are included?

Based on YIYANG SHENDA product data for the 22kW AC charging post, protections include overvoltage, undervoltage, overcurrent, leakage, CP voltage, overtemperature, lightning, relay sticking, and grounding detection. These features support electrical safety, but installation must still follow local electrical rules and be reviewed by a qualified engineer.

What can the display show?

The unit has a 4.3 inch HCI display. The product data also describes status-light logic - green for standby or plug connected, blue for waiting or charging, and red for fault. This helps users identify charging state from the unit itself.

Does the wallbox support Wi-Fi, Bluetooth, APP or OCPP?

For the 22kW AC charging post, Bluetooth and Wi-Fi are listed as optional, and OTA updating is listed as a benefit. For APP, RFID, OCPP, DLB, MID, PEN, 4G/Ethernet or other smart functions, the actual model and configuration should be confirmed with the manufacturer before ordering.

Is a 22kW AC wallbox the same as a DC fast charger?

No. A 22kW AC wallbox supplies AC power to the vehicle’s onboard charger. DC fast charging uses different equipment and a different power delivery method.