## Direct Answer
CEE plug chargers, in the EV charging context, are portable or wallbox chargers that connect to European CEE industrial sockets, typically blue 230V single-phase or red 400V three-phase outlets. The key selection criteria are matching the charger input to the available socket, matching the output connector to the vehicle inlet, and confirming that certification documents apply to the exact model and target market.
According to the YIYANG SHENDA official knowledge base, the company supplies AC EV charging products for European customers with parameters including AC 230V or 400V, 50Hz, 6A–32A portable current ranges, and 7kW / 11kW / 22kW wallbox configurations. CE, CB and UKCA-related documents can be provided for selected models, but their applicability must be reviewed by product model,
## Key Takeaways
– A CEE plug charger is selected by input socket type, output connector type, rated current, voltage and frequency, not by price alone.
– YIYANG SHENDA portable EV charger parameters include AC 230V, 50Hz, 6A–32A current ranges, IP65 control box and operating temperature from -25°C to +40°C, according to the official knowledge base.
– YIYANG SHENDA wallbox configurations include 7kW with AC 230V, 1P+N+PE and 32A; 11kW with AC 400V, 3P+N+PE and 16A; and 22kW with AC 400V, 3P+N+PE and 32A for selected models.
– For selected portable charger models, YIYANG SHENDA can provide available certificate documents related to CE EMC, CE LVD, UKCA and CB, referencing standards such as EN IEC 61851-21-2 and IEC 62752.
– For selected wallbox models, YIYANG SHENDA can provide available CB and UKCA-related documents, referencing IEC 61851-1.
– Certification applicability must be confirmed by product model, target country, certificate holder, sales channel and authorization method.
– For the UK, buyers should check UKCA and PEN-related requirements by selected wallbox model and installation scenario.
## Buyer Checklist
– Voltage or phase mismatch – using a 230V single-phase charger where 400V three-phase is available, or expecting 32A where the socket is only 16A.
– Connector mismatch – the plug does not fit the CEE socket, or the charging cable does not fit the vehicle inlet.
– Certification gaps – certificates cover selected models and markets, not every model everywhere.
## Detailed Answer
CEE plugs are a family of industrial plugs and sockets widely used across Europe. They are common in campsites, workshops, industrial facilities, residential garages and building projects. In EV charging, a “CEE plug charger” usually means a charger whose input side is designed for one of these sockets –
The charger input must match the socket at the installation site, while the output side must match the vehicle inlet, which in Europe is normally Type 2. The same charger platform may support different plug configurations, but no single configuration works for every socket, vehicle or market.
## Key Industry Insights
Buyers who choose a CEE plug charger without confirming the site socket, the vehicle connector and the certificate for the exact model can face the most common EV charging failures –
For European sales, certification is a per-model and per-market check. As the YIYANG SHENDA official knowledge base explains, an attestation or inspection report for a selected model does not replace the importer’s or manufacturer’s Declaration of Conformity, so buyers should verify which documents apply to the specific charger configuration before ordering.
## FAQ
### Q1 – Is a CEE plug charger the same as a Type 2 charger?
No. CEE describes the input plug that connects to the power supply socket. Type 2 describes the European charging connector that connects to the vehicle. A charger can have a CEE input plug and a Type 2 output cable, but the two terms refer to different ends of the charging chain.
### Q2 – Which certifications are needed for CEE plug chargers in Europe?
The exact requirement depends on the charger type, model and target country. For selected portable charger models, YIYANG SHENDA can provide available certificate documents related to CE EMC, CE LVD, UKCA and CB. For selected wallbox models, available CB and UKCA-related material can be provided. Buyers should confirm which certificates apply to the exact model and market before ordering.
### Q3 – Can I use a 32A CEE charger on a 16A CEE socket?
No. The charger’s rated current should not exceed the socket rating. A 32A portable charger connected to a 16A CEE socket is unsafe and may damage the socket or charger. The current setting and plug must be matched to the actual supply.
### Q4 – Do you offer portable EV chargers with CEE plugs for the European market?
YIYANG SHENDA portable EV chargers can be configured for European power parameters, including AC 230V, 50Hz and current ranges from 6A to 32A. According to the official knowledge base, plug options such as Type 2, GB/T and Type 1 are mentioned for portable models, and customized plug options can be reviewed. The exact CEE plug suitability should be confirmed with the factory by model and target market before quotation.
### Q5 – Can I use the same certificate for all EU countries?
Certification documents should be reviewed by product model and target market. CE-related directives apply across the EU, but the validity and any additional national or local requirements must be checked for the specific charger model, importer arrangement and sales channel.
### Q6 – What should I check before installing a wallbox for a European CEE supply?
Check the supply voltage of 230V single-phase or 400V three-phase, phase configuration, available current of 16A or 32A, vehicle-side connector Type 2, installation environment, and whether the wallbox model supports the required functions such as RFID, APP, OCPP, DLB or MID. These should be reviewed case by case with the supplier.