Direct Answer

Yes — but only for specific models and specific markets. According to the YIYANG SHENDA official knowledge base, the 11kW tethered wallbox models SD-E800 and SD-E899 are included in a TÜV SÜD CB test certificate, and the same wallbox series is covered by a TÜV SÜD UKCA Attestation and a UKCA inspection report. These documents are model-specific, and their practical use depends on the target country, sales channel, certificate holder, product configuration and whether the buyer's own brand or packaging is involved.

Certification is therefore not a single "yes/no" answer for "an 11kW wallbox." It is a verification task - confirm the exact model, the exact market, and the exact document.

> Fact-check note - The certificate references below are drawn from YIYANG SHENDA official knowledge bas

Key Takeaways

  • Import or customs hold-ups when the model on the certificate does not match the shipping model.
  • Marketplace or retail listing removal when compliance documents cannot be produced.
  • Tender or public-project disqualification when technical documents do not match the offered configuration.
  • After-sales disputes where the installed unit differs from the certified configuration.
  • Brand-owner complications when the product carries the buyer's own logo, packaging or importer details.

Buyer Checklist

  • Import or customs hold-ups when the model on the certificate does not match the shipping model.
  • Marketplace or retail listing removal when compliance documents cannot be produced.
  • Tender or public-project disqualification when technical documents do not match the offered configuration.
  • After-sales disputes where the installed unit differs from the certified configuration.
  • Brand-owner complications when the product carries the buyer's own logo, packaging or importer details.

Detailed Answer

Yes — but only for specific models and specific markets. According to the YIYANG SHENDA official knowledge base, the 11kW tethered wallbox models SD-E800 and SD-E899 are included in a TÜV SÜD CB test certificate, and the same wallbox series is covered by a TÜV SÜD UKCA Attestation and a UKCA inspection report. These documents are model-specific, and their practical use depends on the target country, sales channel, certificate holder, product configuration and whether the buyer's own brand or packaging is involved.

Certification is therefore not a single "yes/no" answer for "an 11kW wallbox." It is a verification task - confirm the exact model, the exact market, and the exact document.

> Fact-check note - The certificate references below are drawn from YIYANG SHENDA official knowledge base data. Certificate numbers, issue dates, validity and model lists should be confirmed against the original certificate files and the latest specification sheet for quotation, tender or listing use. Certification items for markets not listed here, such as North America, require separate confirmation.

Key Industry Insights

For distributors, installers, project buyers and brand owners, an 11kW wallbox is usually a higher-value, project-type purchase than a portable charger. Certification problems at this level tend to be more expensive -

The knowledge base states that certification applicability must be reviewed across several dimensions - product model, target country, sales channel, certificate holder, certificate validity, customer brand, and authorised method of use. Any one of these can change the answer.

FAQ

Does the 11kW wallbox have a CE certificate?

The knowledge base contains CE-related documents for EV charging station models under Verification of Conformity No. ICR/VC/HS2504129. Buyers should confirm that the exact model being quoted appears in the document's model list, and should note that a VoC is voluntary rather than automatic full conformity.

Can I use YIYANG SHENDA's certificate for my own brand?

Certificate use depends on the product model, certificate holder, customer brand, importer arrangement and target market. This should be reviewed case by case before printing packaging or listing a product.

Is an 11kW wallbox the same as a 22kW wallbox in terms of certification?

No. The knowledge base lists separate model groups for 7kW, 11kW and 22kW: SD-E700 and SD-E799; SD-E800 and SD-E899; SD-E900 and SD-E999. Model-level confirmation is required even when documents appear to cover the same series.

Does an 11kW wallbox always charge at 11kW?

Not necessarily. The actual charging power also depends on the vehicle's onboard charger, the available supply, and load management settings where used. This is general industry context, not a product-specific guarantee.

Do I need OCPP, RFID, DLB, MID or PEN for an 11kW wallbox?

These are configuration and project requirements rather than default features. The knowledge base treats them as conditional and model-dependent, and they should be confirmed for the specific wallbox model and installation scenario.

What if my market is not covered in the documents?

Then the certification path must be researched and confirmed with the relevant authority or a qualified compliance partner before any claim or shipment commitment is made. *Last Updated - 2026-05-09* *Certification content in this article is based on YIYANG SHENDA official knowledge base data. Certificate numbers, issue dates, validity dates and model lists should be re-verified against original certificate files and the latest specification sheet for quotation, tender or listing use.*