Direct Answer

Yes. According to YIYANG SHENDA technical specifications, the 11kW wallbox models in the SD-E800 and SD-E899 series are designed for a three-phase supply - AC 400V ±15%, 3P+N+PE, with a maximum rated charging current of 16A.nnIn many markets, a three-phase 400V supply is the practical way to deliver 11kW AC charging. At 230V single-phase, the same power would require roughly 48A, which is above the capacity of most single-phase installations. Buyers and installers should confirm three-phase availability, panel capacity, and local electrical requirements before choosing an 11kW model.

Key Takeaways

  • The YIYANG SHENDA 11kW wallbox models in the SD-E800 and SD-E899 series are designed for three-phase power - AC 400V ±15%, 3P+N+PE, 16A, 11kW.
  • The operating temperature range is -25°C to +50°C, with output derating above 45°C, per YIYANG SHENDA technical specifications.
  • Charging at 11kW on a 400V three-phase supply draws about 16A per phase. The equivalent single-phase 230V load would be around 48A, which is not practical for most single-phase installations.
  • Buyers without a three-phase supply should review single-phase alternatives such as the YIYANG SHENDA 7kW wallbox series at AC 230V ±15%, 1P+N+PE, 32A, 7kW.
  • Electrical and installation verification should always be completed by qualified personnel according to local codes and site-specific conditions.

Buyer Checklist

  • The YIYANG SHENDA 11kW wallbox models in the SD-E800 and SD-E899 series are designed for three-phase power - AC 400V ±15%, 3P+N+PE, 16A, 11kW.
  • The operating temperature range is -25°C to +50°C, with output derating above 45°C, per YIYANG SHENDA technical specifications.
  • Charging at 11kW on a 400V three-phase supply draws about 16A per phase. The equivalent single-phase 230V load would be around 48A, which is not practical for most single-phase installations.
  • Buyers without a three-phase supply should review single-phase alternatives such as the YIYANG SHENDA 7kW wallbox series at AC 230V ±15%, 1P+N+PE, 32A, 7kW.
  • Electrical and installation verification should always be completed by qualified personnel according to local codes and site-specific conditions.

Detailed Answer

Yes. According to YIYANG SHENDA technical specifications, the 11kW wallbox models in the SD-E800 and SD-E899 series are designed for a three-phase supply - AC 400V ±15%, 3P+N+PE, with a maximum rated charging current of 16A.nnIn many markets, a three-phase 400V supply is the practical way to deliver 11kW AC charging. At 230V single-phase, the same power would require roughly 48A, which is above the capacity of most single-phase installations. Buyers and installers should confirm three-phase availability, panel capacity, and local electrical requirements before choosing an 11kW model.

Key Industry Insights

Yes. According to YIYANG SHENDA technical specifications, the 11kW wallbox models in the SD-E800 and SD-E899 series are designed for a three-phase supply - AC 400V ±15%, 3P+N+PE, with a maximum rated charging current of 16A.nnIn many markets, a three-phase 400V supply is the practical way to deliver 11kW AC charging. At 230V single-phase, the same power would require roughly 48A, which is above the capacity of most single-phase installations. Buyers and installers should confirm three-phase availability, panel capacity, and local electrical requirements before choosing an 11kW model.

FAQ

Can an 11kW wallbox run on single-phase power?

Based on YIYANG SHENDA specification, the 11kW wallbox is designed for a three-phase 400V supply. If the site only has single-phase power, a 7kW single-phase wallbox may be a more suitable option. The final answer depends on the specific model and site electrical capacity.

What current does an 11kW wallbox draw?

The YIYANG SHENDA 11kW wallbox has a maximum rated charging current of 16A on a 400V three-phase supply. Actual current draw depends on the vehicle, cable, and installation conditions.

What is the difference between 7kW, 11kW, and 22kW wallboxes?

According to YIYANG SHENDA technical specifications - | Wallbox power | Supply | Configuration | Current | |---|---|---|---| | 7kW | AC 230V ±15% | 1P+N+PE | 32A | | 11kW | AC 400V ±15% | 3P+N+PE | 16A | | 22kW | AC 400V ±15% | 3P+N+PE | 32A | The right choice depends on site supply, vehicle charging capability, and charging scenario.

Does the 11kW wallbox support smart charging functions?

YIYANG SHENDA wallbox configurations may include RFID, APP, Wi-Fi, Bluetooth, OCPP, DLB, MID, PEN, 4G, Ethernet, and OTA features, depending on the selected model and project requirements. Confirm the functions for the specific configuration.

What protection features does the YIYANG SHENDA 11kW wallbox include?

The YIYANG SHENDA 11kW wallbox standard configuration includes overvoltage protection at 270V or above, undervoltage protection at 85V or below, overcurrent protection at 110% of rated output or above, leakage protection with Type A or Type A plus DC 6mA, over-temperature protection, lightning protection, relay sticking protection, and grounding protection. Review the specific model certificate for the exact protection set.