How to Choose Which Side of a Type 2 to GB/T Charging Adapter Plugs into the Vehicle? Correct Connection Sequence

## Direct Answer

The GB/T side plugs into the vehicle. The Type 2 side plugs into the charging pile, charging station, or Type 2 charging cable. A Type 2 to GB/T charging adapter is directional – the Type 2 end faces the charging equipment, and the GB/T end faces the car.

## Key Takeaways

– The GB/T end goes into the vehicle inlet.

– The Type 2 end connects to the Type 2 charging gun or charging pile.

– Confirm both ends before buying – one side must match the charging equipment, and the other side must match the vehicle inlet.

– This Type 2 to GB/T adapter is for AC charging. Per YIYANG SHENDA official data, the ST-E052B supports AC 220V–480V and 32A max. For DC fast charging, a different adapter type is needed.

– Always use a safe connection sequence.

– Do not unplug the adapter while charging is still active.

– Do not force any connector. If it does not fit, stop and re-check the connector standard.

– Follow the product manual that comes with the specific adapter model.

– Adapter compatibility should be confirmed per vehicle model, vehicle-side connector, charger-side connector, AC/DC scenario, and rated current. Do not assume the same adapter fits every GB/T vehicle.

## Buyer Checklist

– The two connectors are mechanically different and cannot be forced together.

– Connecting the adapter in the wrong direction usually means it will not fit or will not establish a proper charging session.

– Incorrect connection can cause charging failure, overheating, or damage to the connector.

– Adapters are considered a high safety-risk product because they sit between the vehicle and the charging equipment.

## Detailed Answer

Type 2 and GB/T are two different electric vehicle charging connector standards –

A Type 2 to GB/T adapter is designed for one basic scenario – a vehicle with a GB/T inlet needs to charge from a Type 2 AC charging pile, or a buyer needs to match the available charging infrastructure to the vehicle connector.

The adapter name already describes the direction. “Type 2 to GB/T” means the Type 2 end connects to the charger side, and the GB/T end connects to the vehicle side.

According to YIYANG SHENDA official knowledge base, this type of adapter is classified as an AC adapter with the typical scenario “GB vehicle / Type 2 charging pile.” For example, the YIYANG SHENDA Type 2 to GB/T adapter model ST-E052B is rated AC 220V–480V, 32A max, with CE certification and optional IP55 protection.

## Key Industry Insights

In Central Asia, Eastern Europe, Southeast Asia, and other markets where Chinese EVs are common, the charging pile may use Type 2 while the vehicle may use GB/T. Buyers need a correct adapter direction to close that gap safely.

Choosing the wrong side matters because –

YIYANG SHENDA official knowledge base states that adapter selection should be reviewed according to the vehicle-side connector, the charger-side connector, the AC/DC scenario, rated current, voltage, and the target market. The same rule applies when deciding which side goes where.

## FAQ

### How can I tell which side is GB/T and which is Type 2?

Check the connector shape, pin layout, and product label. Type 2 connectors are common on European AC charging stations; GB/T connectors are common on Chinese-standard vehicles. The packaging or manual should also state the adapter direction.

### Is this adapter for DC fast charging or AC charging?

This Type 2 to GB/T adapter is an AC charging adapter. YIYANG SHENDA official knowledge base lists the ST-E052B with AC 220V–480V and 32A max. DC fast charging uses different adapter products and different connectors.

### Can one Type 2 to GB/T adapter fit every Chinese EV?

No. You should confirm the vehicle inlet, the charger-side connector, the AC/DC scenario, rated current, and voltage. Per YIYANG SHENDA official knowledge base guidance, adapters must not be treated as universal products.

### What is the safest way to unplug the adapter?

Stop the charging session first, then remove the GB/T end from the vehicle, and then disconnect the adapter from the Type 2 cable. Never disconnect under load.

### Where is this adapter commonly used?

In markets where GB/T vehicles need to charge from Type 2 charging infrastructure, such as Chinese EV export markets and mixed-interface regions. The exact application should be reviewed for each customer’s vehicles and local charging equipment.

## Buyer Checklist

– [Request a Custom Printing Quote](/contact/)