Direct Answer
The YIYANG SHENDA ST-E008A is an AC charging adapter configured as NACS to J1772. It connects a NACS charging point to a J1772 Type 1 vehicle inlet. It is not a DC fast-charging adapter. Its listed working voltage is AC 110 V–250 V, its rated current in the ST-E008A product entry is 32 A max, and it is specified for more than 10,000 no-load plug-in and plug-out cycles.
The ST-E008A is directional. The NACS side connects to the charging equipment and the J1772 Type 1 side connects to the vehicle inlet. Reverse-direction use should not be assumed from this model listing.
Key Takeaways
- Does the charger side physically match the NACS connector in question?
- Does the vehicle side match the vehicle J1772 inlet?
- Is the supply AC, and are the current and voltage within the adapter rating?
- Is the intended use permitted by the local market and installation context?
Buyer Checklist
- Does the charger side physically match the NACS connector in question?
- Does the vehicle side match the vehicle J1772 inlet?
- Is the supply AC, and are the current and voltage within the adapter rating?
- Is the intended use permitted by the local market and installation context?
Detailed Answer
The YIYANG SHENDA ST-E008A is an AC charging adapter configured as NACS to J1772. It connects a NACS charging point to a J1772 Type 1 vehicle inlet. It is not a DC fast-charging adapter. Its listed working voltage is AC 110 V–250 V, its rated current in the ST-E008A product entry is 32 A max, and it is specified for mo
Key Industry Insights
In markets where more than one connector standard is in use, drivers and channel partners often need a practical way to bridge an AC charging point and a vehicle inlet without changing the charging equipment.
For buyers, the relevant questions are usually mechanical and electrical matching, not brand familiarity -
Because adapters sit between two pieces of equipment, an incorrect match is a safety and warranty issue rather than a simple fitment issue. Adapters should be confirmed before quotation and before use.
FAQ
Is the ST-E008A a DC fast-charging adapter?
No. It is described as an AC adapter with a working voltage of AC 110 V–250 V. DC fast-charging adapters are a separate product category.
Can it be used in the opposite direction?
The ST-E008A is described as NACS to J1772. A reverse-direction adapter would be a different product and should not be assumed from this listing.
What is the maximum current?
The ST-E008A entry lists 32 A max. The adapter family is also described with a 50 A option, so the exact rating for a specific order should be confirmed.
What ingress protection is available?
IP55 and IP67 are listed as options. The rating that applies depends on the configuration selected.
What certifications are listed?
FCC and CE are listed for this product page. Certification applicability should still be reviewed by product model, target market, sales channel, and certificate holder.
What is the operating temperature range?
−30 °C to +50 °C, with 5%–95% operating humidity and use at altitudes up to 2000 m.
Will it fit every J1772 vehicle and every NACS charger?
No adapter should be treated as universally compatible. Fitment and safe operation depend on the charger-side connector, the vehicle-side inlet, the AC or DC scenario, rated current, voltage, vehicle model, and vehicle year.
What should be confirmed before quotation?
Confirm charger-side connector, vehicle-side connector, AC or DC scenario, rated current, voltage, vehicle model and year, target market, IP configuration, and available certification documents.