Direct Answer

For Australia and New Zealand installers, as general market context, the correct product choice usually depends on four items in this order - the installation's power supply, single-phase 230/240 V or three-phase 400 V; the connector type required by the vehicle side, where Type 2 is a common mainstream AC interface in ANZ; whether the site needs a fixed wallbox or a portable Mode 2 charger; and the RCM-related document status of the exact model being supplied.

RCM is a compliance marking, not a product feature. According to YIYANG SHENDA official knowledge base, selected models have an RCM certification basis, but RCM status must still be confirmed by product model, certificate holder, importer arrangement, sales channel, and whether New Zealand adds requirements beyond Australia.

Key Takeaways

  • [ ] Confirm destination country and local jurisdiction.
  • [ ] Confirm supply type, capacity, and whether the site has single-phase or three-phase power.
  • [ ] Confirm fixed wallbox or portable Mode 2 charging format.
  • [ ] Confirm vehicle connector type and cable requirement.
  • [ ] Confirm indoor or outdoor installation conditions.
  • [ ] Confirm protection requirements and local wiring rules.
  • [ ] Confirm model-level RCM evidence and responsible supplier arrangement.
  • [ ] Confirm smart functions such as RFID, OCPP, DLB, MID, or network connectivity.

Buyer Checklist

  • [ ] Confirm destination country and local jurisdiction.
  • [ ] Confirm supply type, capacity, and whether the site has single-phase or three-phase power.
  • [ ] Confirm fixed wallbox or portable Mode 2 charging format.
  • [ ] Confirm vehicle connector type and cable requirement.
  • [ ] Confirm indoor or outdoor installation conditions.
  • [ ] Confirm protection requirements and local wiring rules.
  • [ ] Confirm model-level RCM evidence and responsible supplier arrangement.
  • [ ] Confirm smart functions such as RFID, OCPP, DLB, MID, or network connectivity.

Detailed Answer

Last updated - September 2026

Source note - RCM, EESS registration, responsible supplier arrangements, and New Zealand requirements are dynamic regulatory topics. This article provides general market context based on YIYANG SHENDA official knowledge base and should be verified against current official sources and the responsible supplier's records at the time of quotation, purchase, or installation.

Key Industry Insights

Last updated - September 2026

Source note - RCM, EESS registration, responsible supplier arrangements, and New Zealand requirements are dynamic regulatory topics. This article provides general market context based on YIYANG SHENDA official knowledge base and should be verified against current official sources and the responsible supplier's records at the time of quotation, purchase, or installation.

FAQ

Does YIYANG SHENDA have RCM for its wallbox and portable chargers?

The knowledge base states that user-confirmed RCM-related information exists for Australia and New Zealand, and that selected models have an RCM certification basis. Because RCM depends on the exact model, certificate holder, importer arrangement, and whether the customer can use or reference the documents, this must be confirmed case by case. A general "all products are RCM certified" claim should not be made.

Should an ANZ installer choose 7 kW or 22 kW for a residential site?

The knowledge base lists 7 kW as single-phase 230 V, 32 A, and 22 kW as three-phase 400 V, 32 A. The practical constraint is usually the property's supply, main fuse or breaker capacity, and cable run. Many homes are single-phase, so 7 kW is often the starting point. Three-phase sites may support 11 kW or 22 kW. A licensed electrician and local network requirements should confirm this.

Is a portable charger or a wallbox better for Australia and New Zealand?

They address different needs. A wallbox suits a fixed, daily charging location. A portable charger suits travel, backup, vehicle delivery, or sites without an installed wallbox. Some distributors and installers carry both, plus a Type 2 cable. The knowledge base recommends confirming country, customer type, product type, quantity, plug or interface, certification requirement, and OEM request before quoting.

Do all wallbox chargers support OCPP, DLB, MID, or RFID?

No. OCPP support depends on the selected wallbox model and configuration, and the same applies to DLB, MID, and RFID. For charging operators or network projects, protocol version and backend compatibility should be checked per model before confirming a project.

Can an installer use the supplier's RCM certificate directly?

Certificate use depends on the product model, certificate holder, customer brand, importer arrangement, and target market. The knowledge base advises reviewing available documents by model and market rather than assuming transferability.

What is different for New Zealand compared with Australia?

The knowledge base states that New Zealand may have additional requirements beyond the Australian approach, and that this must be confirmed by model and sales channel. It should not be assumed that an Australian RCM position automatically covers New Zealand in every case.

How should a first order be structured?

The knowledge base suggests starting with proofs or a small trial order to verify quality, compatibility, packaging, and market feedback before a bulk order. proof results validate the proof and the tested scenario, not every vehicle or installation.

What documents should be requested before quotation?

Request the current datasheet, model-level RCM evidence where available, EESS registration details where applicable, New Zealand applicability confirmation, certificate holder details, importer or responsible supplier arrangement, certificate scope and validity, document-use permission, and product test or compliance records for the exact model and target market.