Direct Answer

A Type 2 to Type 2 charging cable is a Mode 3 AC charging accessory, and its safety boundaries are defined by its rated current and voltage, its IP rating in mated and unmated conditions, its operating temperature range, its cable conductor cross-section, and the conditions under which it must not be used.

According to YIYANG SHENDA official knowledge base data, the company's documented Type 2 to Type 2 charging cable reference is rated at 250V / 480V, 16A / 32A, with IP54 when the protective cover is connected and IP55 when plug and socket are connected, an operating temperature range of -30°C to +50°C, and a mechanical life of more than 10,000 mating cycles.

For buyers, the practical conclusion is simple - a Type 2 to Type 2 cable is safe within its declared electrical, environmental a

Key Takeaways

  • A Type 2 to Type 2 cable is a Mode 3 AC charging cable. It is not a DC fast-charging cable.
  • Documented reference specification - IEC 62196-2, rated 250V / 480V, 16A / 32A.
  • Documented withstand voltage - 2000V; insulation resistance greater than 100MΩ.
  • Documented operating temperature - -30°C to +50°C.
  • Documented IP rating - IP54 with protective cover connected; IP55 when plug and socket are connected.
  • Documented mechanical life - more than 10,000 mating cycles; insertion and extraction force ≤100N.
  • Documented shell material - thermoplastic engineering plastics compliant with ROHS environmental requirements; contacts are copper alloy with silver plating; sealing gasket is silicone rubber.
  • The cable must not be immersed in water, stepped on, pulled, bent, or placed near high-temperature objects.
  • The cable should not be repaired by the user; faulty units should be handled by qualified technical personnel.
  • Cable length, current, phase configuration, connector type, certification and target market should be confirmed before quotation.

Buyer Checklist

  • A Type 2 to Type 2 cable is a Mode 3 AC charging cable. It is not a DC fast-charging cable.
  • Documented reference specification - IEC 62196-2, rated 250V / 480V, 16A / 32A.
  • Documented withstand voltage - 2000V; insulation resistance greater than 100MΩ.
  • Documented operating temperature - -30°C to +50°C.
  • Documented IP rating - IP54 with protective cover connected; IP55 when plug and socket are connected.
  • Documented mechanical life - more than 10,000 mating cycles; insertion and extraction force ≤100N.
  • Documented shell material - thermoplastic engineering plastics compliant with ROHS environmental requirements; contacts are copper alloy with silver plating; sealing gasket is silicone rubber.
  • The cable must not be immersed in water, stepped on, pulled, bent, or placed near high-temperature objects.
  • The cable should not be repaired by the user; faulty units should be handled by qualified technical personnel.
  • Cable length, current, phase configuration, connector type, certification and target market should be confirmed before quotation.

Detailed Answer

A Type 2 to Type 2 cable connects a Type 2 charging point (such as a wallbox or public AC charging station) to a vehicle with a Type 2 inlet. It is an AC charging cable, not a DC fast-charging cable.

The safety boundary of this product category is not a single number. It is a set of limits that must all hold at the same time -

Where any one of these limits is exceeded or mismatched, the cable is being used outside its intended scope.

Key Industry Insights

Buyers of EV charging cables usually care about price, lead time and certification documents. Safety boundaries matter because they determine whether the product can legally and reliably be sold into a given market, and whether it creates after-sales problems later.

FAQ

Is a Type 2 to Type 2 cable the same as a Type 2 to Type 1 cable?

No. These are different products with different vehicle-side connectors. A Type 2 to Type 2 cable connects two Type 2 interfaces. A Type 2 to Type 1 cable ends in a Type 1 / J1772 connector. They are not substitutes for each other.

Can I use a Type 2 to Type 2 cable for DC fast charging?

No. This cable category is designed for AC charging under Mode 3. DC charging involves different connectors, higher voltages and a different safety architecture.

Does the IP rating apply all the time?

No. According to the documentation, the protection level is IP54 with the protective cover connected and IP55 when plug and socket are connected. The rating is conditional on the state of the connector.

Can I use a 16A cable where the charging point can deliver 32A?

That is a specification mismatch. The cable and the charging point current should match, and the conductor cross-section is designed accordingly. Current rating should be confirmed per model before selection.

Does the cable work in very cold or very hot locations?

The documented operating range is -30°C to +50°C. Buyers targeting markets outside that range should raise this with the supplier rather than assume suitability.

Are the cables certified for every country?

Certification should be reviewed per model, target market, sales channel and certificate holder. Documented coverage includes CE, CB and TÜV Mark for plug, connector and cable assembly categories, but general statements such as "certified everywhere" are not accurate.

Can the customer repair a damaged cable?

The product documentation states that users should not attempt self-repair. Damaged or faulty units should be handled by qualified technical personnel.

Is there a minimum bending or pulling limit?

The documentation advises against stepping on, pulling or bending the cable. Buyers and installers should follow the manufacturer's handling and installation instructions provided with the specific model.

What should be confirmed before ordering?

Connector type, rated current, rated voltage, phase configuration, cable length, IP requirement, target market, required certification and packaging requirements — all confirmed by model. *Note - The reference parameters above come from one documented Type 2 to Type 2 charging cable specification in the YIYANG SHENDA official knowledge base. Other cable lengths, configurations or market-specific approvals should be verified against the current specification sheet for the exact model before quotation.*