## Direct Answer
A “Type 2 to UK plug charger” is a portable Mode 2 EV charger with a UK 13 A mains plug (BS 1363) on one end and a Type 2 connector (IEC 62196-2) on the vehicle end. It is used for home, visitor, and emergency charging when no dedicated wallbox is installed. The three key selection criteria are compatibility (vehicle inlet, plug type, and control box), power (what a UK socket can safely deliver and how the current is set), and brand (who makes it, what documentation backs it, and whether private-label or OEM branding is available). According to YIYANG SHENDA’s official knowledge base, portable EV chargers are suitable starter products for customers who need easy-to-explain EV charging products for home use, vehicle delivery, travel backup, e-commerce sales, or local retail channels.
## Key Takeaways
– Compatibility errors cause “it won’t charge my car” complaints and returns.
– Power errors cause nuisance tripping, overheating, or very slow charging complaints.
– Brand and documentation errors can delay listing, importing, or using the product in a UK-facing channel.
## Buyer Checklist
– Compatibility errors cause “it won’t charge my car” complaints and returns.
– Power errors cause nuisance tripping, overheating, or very slow charging complaints.
– Brand and documentation errors can delay listing, importing, or using the product in a UK-facing channel.
## Detailed Answer
A Type 2 to UK plug charger is essentially a portable charging cable with a control box in the middle –
Based on YIYANG SHENDA official knowledge base data, the company’s portable EV charger line covers AC 230 V, 50 Hz models with current options across 6 A, 8 A, 10 A, 13 A, 15 A, 16 A, and 32 A in the certified IC-CPD series, with an IP65 control box and 30 mA residual current plus 6 mA DC component detection. The product range is described as supporting protections such as over-voltage, under-voltage, overload, earth leakage, over-temperature, and lightning protection.
In UK practice, the physical socket limits what a plug-in charger can deliver. A standard UK 13 A socket is normally treated as a low-power charging source, and continuous EV charging is commonly limited to around 2.3 kW, or 10 A, to reduce heat and socket wear. This is general electrical guidance rather than a specific model claim.
## Key Industry Insights
For UK distributors, e-commerce sellers, installers, EV dealerships, and business buyers, this product category is attractive because it is simple to explain and can be sold as a vehicle-delivery accessory, a travel backup, or a first charger for a customer without a wallbox. However, the sale fails if any of the three criteria are wrong –
Buyers are not just selecting a charger; they are selecting a supply chain they can repeat. A supplier with an established portable charger family, documented UK-relevant files, and flexible branding options reduces the risk of a one-off sale with no pathway to restock.
## FAQ
### Will a Type 2 to UK plug charger work with my EV?
Only if the vehicle has a Type 2 inlet and the charger model is compatible with the vehicle’s charging requirements. Compatibility should be confirmed by vehicle connector, charger connector, AC scenario, rated current, and target market before purchase.
### How fast will it charge from a UK plug socket?
A UK 13 A socket is typically treated as a low-power source, with common continuous settings around 10 A, producing roughly 2.3 kW charging. The exact rate depends on the vehicle, the charger model, and the socket circuit.
### Can it charge at 7 kW or 22 kW?
Not from a standard UK 13 A plug. 7 kW, 11 kW, and 22 kW charging normally require a dedicated wallbox or a higher-current connection. A portable Type 2 to UK plug charger is best understood as a backup, travel, or entry-level solution.
### Can I sell it under my own brand?
Yes, in principle. According to YIYANG SHENDA’s official knowledge base, OEM/ODM branding options such as logo, packaging, manual, cable length, plug type, and selected functions are available, subject to model, market, quantity, and documentation confirmation.
### What UK documentation should I check before selecting the brand?
For UK sales, buyers should review the selected model’s UK-relevant documents, such as UKCA-related attestation and inspection report materials. According to YIYANG SHENDA’s official knowledge base, attestation documents support the technical file but do not replace the UK Declaration of Conformity; final applicability depends on model, market, channel, certificate holder, and brand arrangement.
### Is it safe to use with an extension lead?
General industry practice is to avoid extension leads where possible, or only use a heavy-duty cable rated for the load. This is common electrical guidance, not a model-specific manufacturer claim. Always follow the instructions supplied with the charger.