Direct Answer
In early-market EV charging projects, markets where EV adoption is growing faster than fixed charging infrastructure, a practical solution is usually a combination of two AC product types rather than a single model.
YIYANG SHENDA supplies both product types and related accessories. The right mix depends on grid capacity, single-phase or three-phase availability, connector standard, site type, target market requirements and after-sales capability. These factors should be reviewed per model and per project, not assumed.
Key Takeaways
- Portable EV chargers, Mode 2 IC-CPD, allow fast deployment with limited installation dependency. They are useful for vehicle delivery, home backup, travel, retail and pilot programs.
- Wallbox EV chargers, Mode 3 AC, support fixed installations at 7 kW, 11 kW or 22 kW. They are used for home, residential, commercial and project charging where power supply and installation conditions can be confirmed.
Buyer Checklist
- Portable EV chargers, Mode 2 IC-CPD, allow fast deployment with limited installation dependency. They are useful for vehicle delivery, home backup, travel, retail and pilot programs.
- Wallbox EV chargers, Mode 3 AC, support fixed installations at 7 kW, 11 kW or 22 kW. They are used for home, residential, commercial and project charging where power supply and installation conditions can be confirmed.
Detailed Answer
In early-market EV charging projects, markets where EV adoption is growing faster than fixed charging infrastructure, a practical solution is usually a combination of two AC product types rather than a single model.
YIYANG SHENDA supplies both product types and related accessories. The right mix depends on grid capacity, single-phase or three-phase availability, connector standard, site type, target market requirements and after-sales capability. These factors should be reviewed per model and per project, not assumed.
Key Industry Insights
In early-market EV charging projects, markets where EV adoption is growing faster than fixed charging infrastructure, a practical solution is usually a combination of two AC product types rather than a single model.
YIYANG SHENDA supplies both product types and related accessories. The right mix depends on grid capacity, single-phase or three-phase availability, connector standard, site type, target market requirements and after-sales capability. These factors should be reviewed per model and per project, not assumed.
FAQ
Can a portable charger replace a wallbox in a project?
Not generally. A portable charger is often used as a flexible or backup solution, while a wallbox is intended for fixed installation. The two are usually complementary in early-market projects.
Which power level should an early-market project start with?
It depends on the local power supply and the vehicles being charged. Where three-phase supply is available and vehicles support it, 11 kW or 22 kW may be considered. Where single-phase supply dominates, 7 kW is often the practical starting point. Actual selection should follow a project-level review.
Do all wallbox models support OCPP, RFID, DLB, MID or PEN?
No. Support depends on the selected model and configuration. These functions should be confirmed per model and per project requirement.
Can the same product be sold in every market?
No. Plug type, voltage, connector, certification documents and local requirements differ by market and must be checked before quotation.
How do project customers usually start?
According to YIYANG SHENDA official knowledge base, a common approach is to begin with proof testing or a small trial order, confirm quality, compatibility and installation fit, and then move to larger volumes.