Direct Answer

The GB/T side of a Type 2 to GB/T charging adapter plugs into the vehicle. The Type 2 side is for the charging gun or charging cable from the charging station.nnIn short, the connection direction is -nnCharging station / Type 2 charging cable → Type 2 side of adapter → GB/T side into vehicle GB/T inletnnAccording to YIYANG SHENDA's official adapter specifications, this matches the ST-E052B adapter model, which is defined as a Type 2 to GB/T AC charging adapter.nn---

Key Takeaways

  • The GB/T end plugs into the vehicle inlet.
  • The Type 2 end connects to the Type 2 charging gun or cable from the charging station.
  • This type of adapter is for AC charging scenarios, not all charging situations.
  • The ST-E052B is rated up to 32A max, with working voltage of AC 220V–480V.
  • Buyers should verify both the vehicle connector and the charging station connector before purchasing or using an adapter.
  • Always use the adapter with clean, dry, undamaged connectors and follow the product manual.

Buyer Checklist

  • Chinese EV importers
  • Auto parts distributors
  • EV dealers
  • Repair and after-sales service providers
  • Distributors selling into markets where Type 2 chargers and GB/T vehicles operate side by side
  • Vehicle-side connector standard
  • Charging station-side connector standard
  • AC or DC charging scenario
  • Rated current and voltage
  • Product model and instructions

Detailed Answer

Type 2 and GB/T are different EV charging connector standards.nnA Type 2 to GB/T adapter helps connect these two standards in compatible AC charging scenarios. For example, it can help a Chinese EV with a GB/T vehicle inlet charge from a Type 2 AC charging station or Type 2 charging cable.nnThe ST-E052B model is listed in the YIYANG SHENDA adapter range as -nnThis is an AC charging adapter, not a universal DC fast-charging converter. The correct connector direction must be confirmed before use.nn---

Key Industry Insights

Using the wrong side of a Type 2 to GB/T adapter is a common confusion point, especially for -nnIf a buyer or installer connects the wrong side to the vehicle, the adapter will not fit or may create an unsafe connection. Buyers should confirm -nnThe GB/T side is the vehicle side in this adapter direction. The Type 2 side is the charger/cable side.

FAQ

Does the Type 2 side plug into the vehicle?

No. For a Type 2 to GB/T adapter, the Type 2 side is designed to receive the charging cable or charging gun from the charging station. The GB/T side is the vehicle-side connector.

Is this adapter for DC fast charging?

The ST-E052B model is an AC charging adapter. It is not intended to be treated as a generic DC fast-charging solution. Always confirm the product model and its rated charging scenario before use.

What is the typical use case?

A common use case is connecting a Chinese EV with a GB/T inlet to a Type 2 AC charging station or Type 2 charging cable. This is relevant in markets where Type 2 charging infrastructure is common and GB/T vehicles are being imported or sold.

What is the correct connection sequence?

A practical connection sequence is - 1. Confirm the charging station is off or not yet started. 2. Connect the GB/T side of the adapter into the vehicle’s GB/T inlet until it is fully seated. 3. Connect the Type 2 connector from the charging cable into the adapter’s Type 2 side until it is fully locked. 4. Start charging according to the charging station instructions. For disconnecting - 1. Stop the charging session first. 2. Disconnect the Type 2 connector from the adapter. 3. Then remove the adapter from the vehicle. Always follow the adapter manual and the charging equipment manufacturer’s instructions. If the product manual or the charging station manufacturer provides a different sequence, always follow those instructions.