Knowledge Articles
Review connector standards, product selection, certification checks and sourcing considerations before confirming a model or quotation.
Article Directory
Search the Knowledge Articles directory by the EV charger question, product or standard you need to review.
Knowledge Article
A retail chain with an existing consumer electronics, accessory, or cable product business can extend into EV charging by reusing its store network, online channels, local brand recognition, and after-sales handling. The new product categories may include EV charging cables, portable EV chargers, wallbox chargers, and
Read moreKnowledge Article
A home wallbox charger is a fixed AC charging unit mounted on a garage wall, carport post, or driveway side — and it fits naturally into home improvement and garage upgrade channels because it is sold as part of a home upgrade, not as a standalone electronic gadget.
Read moreKnowledge Article
A wallbox charger becomes an "installation package" when the hardware is combined with the site review, model selection, protection functions, accessories, documentation and after-sales support that a specific site needs. For installers, that means offering a defined, reviewable charging solution instead of a single bo
Read moreKnowledge Article
A Type 2 to J1772 adapter is a direction-specific AC charging accessory - the Type 2 side is intended to face the charging source, and the J1772 side is intended to face the vehicle. It is an AC-only product and does not enable DC fast charging. Before ordering, buyers should confirm three things - the direction (charger
Read moreKnowledge Article
A NACS to J1772 adapter is an AC-only charging accessory. It lets a vehicle with a J1772 (Type 1) inlet connect to an AC charging source fitted with a NACS (Tesla-style) connector — typically Level 1 or Level 2 AC charging.
Read moreKnowledge Article
In most AC EV charging setups, a passive Type 1 / Type 2 plug adapter does not include residual current (leakage) protection. Leakage protection is normally provided by the charging equipment upstream — the wallbox (Mode 3) or the in-cable control box of a Mode 2 portable charger — and by the fixed installation, not by
Read moreKnowledge Article
Yes — but only for specific models and specific markets. According to the YIYANG SHENDA official knowledge base, the 11kW tethered wallbox models SD-E800 and SD-E899 are included in a TÜV SÜD CB test certificate, and the same wallbox series is covered by a TÜV SÜD UKCA Attestation and a UKCA inspection report. These document
Read moreKnowledge Article
An EV charging adapter is a directional product. Its direction is normally written as Charger Side → Vehicle Side, so "Type 2 to Type 1" and "Type 1 to Type 2" are two different items, not two names for the same thing.
Read moreKnowledge Article
The buyer of an 11kW wallbox is usually defined less by the power rating and more by the electrical environment it must fit. In most cases, a YIYANG SHENDA 11kW AC wallbox is a three-phase product. Its natural buyers are customers who already have or can arrange a three-phase supply and a fixed installation point.
Read moreKnowledge Article
On this page - Short Answer · What OCPP Wallbox Deployment Means · Why It Matters for Buyers · Key Points · Before Project Confirmation · Common Questions · Resource Types · Verification Note
Read moreKnowledge Article
*Last Updated - This topic is model-dependent. Confirm current specifications, certificate scope and market requirements in current YIYANG SHENDA product documents.*
Read moreKnowledge Article
An EV dealer extends into charging by treating charging hardware as part of the vehicle sale, not as a separate accessory business. In practice, that usually means combining three product families - EV charging cables for everyday connection and replacement, portable EV chargers for backup, travel and vehicle delivery,
Read moreContinue Your Review