Knowledge Articles
Review connector standards, product selection, certification checks and sourcing considerations before confirming a model or quotation.
Article Directory
Search the Knowledge Articles directory by the EV charger question, product or standard you need to review.
Knowledge Article
The main difference between a single-phase and a three-phase Type 2 charging cable is how many live conductors it carries and how much power it can deliver. A single-phase cable (1P+N+PE) is typically rated 16A or 32A and supports roughly 3.7 kW to 7.4 kW. A three-phase cable (3P+N+PE) is typically rated 16A or 32A and
Read moreKnowledge Article
A 22 kW Type 2 wallbox is a three-phase AC charging unit. It requires a 400 V AC three-phase supply with neutral and protective earth, commonly described as 3P+N+PE, and 32 A per phase. It uses a Type 2 connector on the vehicle side. According to YIYANG SHENDA official knowledge base, the 22 kW AC charging post is list
Read moreKnowledge Article
A "Tesla to GB/T" adapter is not one universal product. Every EV charging adapter has a defined direction — charger side → vehicle side — plus an AC or DC scenario, a rated current and voltage, and a target market. Until those four points are confirmed, no adapter should be described as compatible with a Tesla vehicle
Read moreKnowledge Article
A 7kW wallbox is a single-phase AC charging station, typically rated at 230V and 32A, using a Type 2 connector. It is the standard home and light-commercial charging class in markets where the mains supply is single-phase, and it matches electric vehicles whose onboard charger accepts roughly 6.6–7.4kW.
Read moreKnowledge Article
A 16A portable EV charger is normally a Mode 2 / IC-CPD device that plugs into a suitable socket and provides portable AC charging for an electric vehicle. PEN fault protection, however, is mainly linked to the earthing arrangement of fixed charge points on PME (TN-C-S) supplies, so whether a portable charger needs it
Read moreKnowledge Article
A J1772 to Tesla charger adapter is an AC-only adapter that connects the J1772 (Type 1) connector on a charging station to the Tesla / NACS vehicle inlet, so a Tesla can charge from a Level 1 or Level 2 AC charging point.
Read moreKnowledge Article
Last Updated - 2026-05-07
Read moreKnowledge Article
The ST-E052B is an AC-only EV charging adapter with one documented direction - Type 2 charging point (charger side) → GB/T vehicle inlet (vehicle side). It allows a GB/T-equipped electric vehicle to draw AC charging from a Type 2 AC charging point. It is not a DC adapter, it is not bidirectional, and the reverse directi
Read moreKnowledge Article
Last updated - 2026-05-14
Read moreKnowledge Article
A consolidated EV charging keyword library is not a simple list of search phrases. It is an organized map that links each term to its source, a cleaning status, a category, a content priority, and an evidence level.
Read moreKnowledge Article
An 11 kW AC wallbox is a three-phase, Mode 3 AC charging station rated for a 400 V AC supply at 16 A per phase, and it is most commonly fitted with a Type 2 connector or a Type 2 socket. YIYANG SHENDA product data lists the 11 kW wallbox models SD-E800 and SD-E899 at AC 400 V ±15%, 3P+N+PE, 16 A, 11 kW.
Read moreKnowledge Article
Most returns and disputes in portable EV charger and Type 2 charging cable listings do not start with a product fault. They start with a mismatch between what the listing promised and what the buyer believed they were ordering.
Read moreContinue Your Review